A347X1.3GD-A547KX1.3GD OVERVIEW

The three-phase industrial vacuum cleaners of the series “7” represent the top of the range of the three phase vacuum cleaners of “medium power” suitable to be used in the Atex Zones 2-22. They are equipped with electric panel that controls the vacuum cleaner and also a full range of options and can run a centralized vacuum system. All suction units comply with the European Directives and American rules, and as an option they can be supplied with energy efficiency class IE2. All models are equipped with star filter with bigger surface of 2.55m², manual filter shaker and removable container with 100lt of capacity.The three-phase industrial vacuum cleaners of the series “7” represent the top of the range of the three phase vacuum cleaners of “medium power” suitable to be used in the Atex Zones 2-22. They are equipped with electric panel that controls the vacuum cleaner and also a full range of options and can run a centralized vacuum system. All suction units comply with the European Directives and American rules, and as an option they can be supplied with energy efficiency class IE2. All models are equipped with star filter with bigger surface of 2.55m², manual filter shaker and removable container with 100lt of capacity.

TECHNICAL FERATURES:

• Machine body Ø460mm
• Side channel blower with three phase motor asynchronous marked ATEX EX II 3GD
• by-pass valve put in as standard
• Vacuum meter to control the filter efficiency
• Electric cable 10m long with industrial plug Ph+ earth 16A IP67 easy to disconnect from the machine
• Manual filter shaker on the side
• Star filter of polyester cat.“L”- Ø460mm, 14 pockets in antistatic version
• Quick inlet Ø70mm
• Waste bin of 100lt with handle and castors
• Hose support in the front side and accessories compartment
• Relief valve as standard
• Rear castors Ø200mm with brake, front castors Ø150mm,antistatic version
• Painted version with trolley Ral 9005 (black), waste bin in stainless steel and filter chamber Ral 7001 (grey)
• X2 version with bin and filter chamber in stainless steel
• X3 version completely in stainless steel, control box included
• Electric control box with phase sequence to avoid the suction unit turning in the opposite direction with consequent blowing out of the sucked dust (ONLY FOR 3D)
• Available with IE2 motors